Product

Placas SMC apiladas — Composites Martiartu

We manufacture technical parts by compression moulding in three material families: SMC for high-volume series, carbon fibre CSMC to lighten structural parts, and phenolic SMC for the most demanding railway fire requirements. All with CNC machining, 5-axis waterjet cutting and in-mould painting in the same plant.

Choose the material or let our selector guide you, based on fire standards, mechanical requirements and the part’s environment.

Material selector

Which material do you need? Answer 3 questions.

We'll point you to the right catalog reference based on fire regulation, mechanical requirements and environment. This doesn't replace the technical datasheet — for that, contact our team.

Substitution engineering

Material substitution: same function, better part

Three material changes we solve with compression moulding, with the datasheet values of each grade.

01

Mica → 3D Structural Phenolic SMC

Battery pack shields (electric vehicles, rail), fire barriers and arc chutes.

TodayFlat mica sheets cut and joined with fasteners or adhesives: every joint is a path for hot gases or an arc, the material is brittle under vibration and impact, and assembly adds cost.

With compression mouldingA single three-dimensional part with ribs, sealing labyrinths and integrated fixings. The phenolic matrix tends to char rather than melt or drip.

  • Shrinkage 0.00% (ISO 2577)
  • Charpy 120 kJ/m² (ISO 179)
  • Flexural 350 MPa (ISO 14125)
  • UL 94 V-0 at 1.2 mm
  • LOI > 100% (ISO 4589-2)
Assess my part →
02

Machined or cast aluminium → CSMC Carbon 57%

Brackets, frames, covers and structural parts currently milled from 6061-T6 billet or cast.

TodayAluminium part with many hours of CNC milling or casting tooling, at 2.70 g/cm³.

With compression mouldingRibs and bosses integrated in a single press cycle, with fewer machining operations and more strength per kilo.

  • 1.51 g/cm³ (−44% vs aluminium)
  • Tensile ≥ 370 MPa
  • +113% specific strength
  • 245 vs 115 MPa·cm³/g
Assess my part →
03

Stainless steel or welded sheet → Electrical and Structural SMC

Outdoor or electrically insulating enclosures, cabinets, covers and housings.

TodaySheet metal cut, bent, welded and painted, needing corrosion protection and added insulation.

With compression mouldingRibbed shapes moulded with no welds or bends, corrosion-free with no anti-corrosion coatings, and inherently insulating.

  • 16 kV/mm
  • CTI 600
  • Glow wire 960 °C
  • HDT > 250 °C
  • UL 94 V-0
Assess my part →

Values from the material manufacturer’s datasheet (indicative values for the Structural Phenolic SMC). Documentation available on request. Final part behaviour (fire, arc, sealing, IP/IK) depends on the design and is validated with the tests each project requires.